RB613T-C
New
Connected Rebar Tying Tool #5 x #5 up to #9 x #10 with 19ga wire
RB613T-C
New
Connected Rebar Tying Tool #5 x #5 up to #9 x #10 with 19ga wire
The TWINTIER® RB613T-C is rebar tying tool with integrated cellular and GPS connectivity. RB613T-C has the same features as RB613T TWINTIER® which is the fastest solution for tying wire #5 x #5 up to #9 on #10 rebar combinations. TWINTIER® technology allows the RB613T-C to tie Approx.4,300 ties per charge, while delivering just the right amount of wire for greater productivity and cost savings. Compared to hand tying this tool can reduce the risk of musculoskeletal injuries.
Product Details
- LOCATION TRACKING [1] [2]
Integrated cellular and GPS connectivity enables you to track your tools. - GEOFENCING [1] [2]
You can set a Geofence, virtual boundaries, around your tool and receive alerts when it moves out of the range. - TOOL STATUS MONITORING [1] [2]
You can monitor the status of each tool in real time enabling you to manage your tool deployment more efficiently. - TROUBLESHOOTING [1] [2]
When an error is detected on your tool, the app notifies you and shows possible solutions so you can minimize downtime. - FASTER TYING
The TwinTier’s Dual Wire Feeding Mechanism doubles the tying speed. The enhanced tying mechanism for the RB613T allows the tool to complete a tie in approximately ½ second, increasing productivity. - COST SAVING
Compared to conventional rebar tying solutions the TwinTier’s Wire Pull Back Mechanism dispenses the precise amount of wire needed to form a tie, reducing wire usage and cutting production cost.
[1] Registration is required for access.
[2] Features are valid only within the USA
- Precast Plants
- Road and Bridge
- Foundations
- Retaining Walls
- Electrical Conduit
- Commercial Buildings
- Water Treatment Tanks
- Basements
- Radiant Tubing
WEIGHT 6.2 DIMENSIONS 11 1/2"(H) x 5”(W) x 14 3/16"(L) MINIMUM TIES PER COIL 115 MAXIMUM TIES PER COIL 205 APPLICABLE WIRE PRODUCT/GA TW1061T / 19Ga, TW1061T-PC / 19Ga, TW1061T-EG / 19Ga, TW1061T-S / 19Ga APPLICABLE REBAR SIZE #5 x #5 - #9 x #10* *Varies by rebar manufacturer TIES PER CHARGE 4,300 (after charging the built-in battery) TIE SPEED Approx. 1/2 sec BATTERY CHARGE TIME Approx. 80 minutes full charge (approx. 60 minutes 80%) BATTERY JPL91450A (1 battery included) CHARGER JC925A (1 charger included)
Accessories
Tool, Owner's manual, Battery, Charger, Belt hook, Carry case
Manuals
Documents
New
Connected Rebar Tying Tool #5 x #5 up to #9 x #10 with 19ga wire
RB613T-C
New
Connected Rebar Tying Tool #5 x #5 up to #9 x #10 with 19ga wire
The TWINTIER® RB613T-C is rebar tying tool with integrated cellular and GPS connectivity. RB613T-C has the same features as RB613T TWINTIER® which is the fastest solution for tying wire #5 x #5 up to #9 on #10 rebar combinations. TWINTIER® technology allows the RB613T-C to tie Approx.4,300 ties per charge, while delivering just the right amount of wire for greater productivity and cost savings. Compared to hand tying this tool can reduce the risk of musculoskeletal injuries.
New
Connected Rebar Tying Tool #5 x #5 up to #9 x #10 with 19ga wire
The TWINTIER® RB613T-C is rebar tying tool with integrated cellular and GPS connectivity. RB613T-C has the same features as RB613T TWINTIER® which is the fastest solution for tying wire #5 x #5 up to #9 on #10 rebar combinations. TWINTIER® technology allows the RB613T-C to tie Approx.4,300 ties per charge, while delivering just the right amount of wire for greater productivity and cost savings. Compared to hand tying this tool can reduce the risk of musculoskeletal injuries.
Product Details
- LOCATION TRACKING [1] [2]
Integrated cellular and GPS connectivity enables you to track your tools. - GEOFENCING [1] [2]
You can set a Geofence, virtual boundaries, around your tool and receive alerts when it moves out of the range. - TOOL STATUS MONITORING [1] [2]
You can monitor the status of each tool in real time enabling you to manage your tool deployment more efficiently. - TROUBLESHOOTING [1] [2]
When an error is detected on your tool, the app notifies you and shows possible solutions so you can minimize downtime. - FASTER TYING
The TwinTier’s Dual Wire Feeding Mechanism doubles the tying speed. The enhanced tying mechanism for the RB613T allows the tool to complete a tie in approximately ½ second, increasing productivity. - COST SAVING
Compared to conventional rebar tying solutions the TwinTier’s Wire Pull Back Mechanism dispenses the precise amount of wire needed to form a tie, reducing wire usage and cutting production cost.
[1] Registration is required for access.
[2] Features are valid only within the USA
- Precast Plants
- Road and Bridge
- Foundations
- Retaining Walls
- Electrical Conduit
- Commercial Buildings
- Water Treatment Tanks
- Basements
- Radiant Tubing
| WEIGHT | 6.2 |
|---|---|
| DIMENSIONS | 11 1/2"(H) x 5”(W) x 14 3/16"(L) |
| MINIMUM TIES PER COIL | 115 |
| MAXIMUM TIES PER COIL | 205 |
| APPLICABLE WIRE PRODUCT/GA | TW1061T / 19Ga, TW1061T-PC / 19Ga, TW1061T-EG / 19Ga, TW1061T-S / 19Ga |
| APPLICABLE REBAR SIZE | #5 x #5 - #9 x #10* *Varies by rebar manufacturer |
| TIES PER CHARGE | 4,300 (after charging the built-in battery) |
| TIE SPEED | Approx. 1/2 sec |
| BATTERY CHARGE TIME | Approx. 80 minutes full charge (approx. 60 minutes 80%) |
| BATTERY | JPL91450A (1 battery included) |
| CHARGER | JC925A (1 charger included) |
Accessories
Tool, Owner's manual, Battery, Charger, Belt hook, Carry case