RB441T
Rebar Tying Tool #3 x #3 up to #7 x #7 with 19ga wire
RB441T
Rebar Tying Tool #3 x #3 up to #7 x #7 with 19ga wire
Discontinued
Check our Latest Model RB443T
Discontinued
Product Details
- The TwinTier’s Dual Wire Feeding Mechanism doubles the tying speed, completing a tie in approximately ½ second, increasing productivity.
- Compared to conventional rebar tying solutions the TwinTier’s Wire Pull Back Mechanism dispenses the precise amount of wire needed to form a tie, reducing wire usage and cutting production cost.
- The TwinTier’s “Wire Bending Mechanism” (Patent Pending) produces a shorter tie height which requires less concrete to cover a wire tie.
- The RB441T’s jaw capacity enables the tool tie up to a #7 x #7 rebar.
- A slim arm fits easily into tight spaces.
- An enclosed magazine protects tie wire and internal mechanisms from debris, providing greater durability.
- Precast Plants
- Road and Bridge
- Tilt-Up
- Foundations
- Retaining Walls
- Electrical Conduit
- Swimming Pools
| WEIGHT | 5.6 |
|---|---|
| DIMENSIONS | 11 1/2"(H) x 4 3/4"(W) x 13"(L) |
| MINIMUM TIES PER COIL | 145 |
| MAXIMUM TIES PER COIL | 265 |
| APPLICABLE WIRE PRODUCT/GA | TW1061T / 19Ga, TW1061T-PC / 19Ga, TW1061T-EG / 19Ga, TW1061T-S / 19Ga, |
| APPLICABLE REBAR SIZE | #3 x #3 - #7 x #7 |
| TIES PER CHARGE | 5000 |
| TIE SPEED | Approx. 1/2 sec |
| BATTERY CHARGE TIME | Approx. 80 minutes full charge (approx. 60 minutes 80%) |
| BATTERY | JPL91450A |
| CHARGER | JC925A |
Accessories
Tool, Owner's manual, Battery, Charger, Belt hook, Carry case