Save your valuable time and money with easy installation.
MAX offers the Innovative wire marking material.
Heatless, Wrapless, Griptube
New Wire Marking System
--Easy Making--
Compare the marking speed
Time & Cost
1000 makings / month
![]() |
![]() |
![]() |
---|---|---|
Round Tubing (Sleeve) | Wrap Around Label | Heat Shrink Tubing |
1.4 Hours |
2.6 Hours |
8.1 Hours |
30.00 |
180.00 |
330.00 |
* Grip Tube saves your time approx. 1.2 hours and 7 hours per month.
* Grip Tube saves your money approx. $150.00 and $300.00 per month.
* Calculated based on general market price (1inch) & our wire marking comparison video.
Grip Tube line up
Wire Size | Recommended Tube Size *1 | ||||||||
---|---|---|---|---|---|---|---|---|---|
GRIP TUBE | LM-TU29G x 100m(328ft)/Roll |
LM-TU37G x 100m(328ft)/Roll |
LM-TU46G x 85m(278ft)/Roll |
||||||
USA AWG |
#26*2 | #24*2 | #22(MTW) | #20(MTW) | #18(MTW) | #16(MTW) | #14(MTW) | ||
EU/UK H05V-K / H07VK |
0.75㎟ | 1.0㎟ | 1.5㎟ | 2.5㎟ | |||||
Wire Outer Diameter |
1.2㎜0.047inch | 1.3㎜0.055inch | 2.1㎜0.083inch | 2.2㎜0.087inch | 2.5㎜0.098inch | 2.7㎜0.106inch | 3.0㎜0.118inch | 3.4㎜0.134inch | 3.7㎜0.145inch |
*1 The recommended size does not guarantee a match between wire and tube.
*2 Vibration may shift the grip tube. We recommend conducting a performance test before actual use.
Innovative wire marking portable printer
Avoid confusion after printing
Our half cut function will print material in sequence you can then bring to your work station or outside installation in-tact and easy to select desired marker.
Customize your marking by selecting the pitch size
You can change the marking pitch length based on the information that needs to be printed up to 5.9 inches.
Design print so it can be read clearly
You can choose the font for your correct reading the marking information from “Clear”, “Standard” and “Square”. If you choose the clear font, you can print 0 as 0/ not too confusing from similar alphabet “O”.